Priority mapping procedure – H3C Technologies H3C S6300 Series Switches User Manual
Page 35
Advertising
25
Table 5 Priority mapping results of not trusting packet priority (when the default dot1p-lp priority
mapping table is used)
Port priority
Local precedence
Queue ID
0 (default)
2
2
1 0 0
2 1 1
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
The priority mapping procedure varies with the priority trust modes. For more information, see the
subsequent section.
Priority mapping procedure
On receiving an Ethernet packet on a port, the switch marks the scheduling priorities (local precedence
and drop precedence) for the Ethernet packet. This procedure is done according to the priority trust
mode of the receiving port and the 802.1Q tagging status of the packet, as shown in
.
Advertising
This manual is related to the following products: