Setting the queue aging time, Displaying and maintaining congestion management – H3C Technologies H3C S6300 Series Switches User Manual
Page 61
51
Setting the queue aging time
When the queue aging time expires, packets already in queues are dropped.
This feature is available in Release 2311P04 and later versions.
To set the queue aging time:
Step Command
Remarks
1.
Enter system view.
system-view N/A
2.
Set the queue aging time. qos queue aging-time time-value
By default, the queue aging time is 0
milliseconds (the queue aging feature is
disabled).
Displaying and maintaining congestion
management
Execute display commands in any view.
Task Command
Display SP queuing configuration.
display qos queue sp interface [ interface-type
interface-number ]
Display WRR queuing configuration.
display qos queue wrr interface [ interface-type
interface-number ]
Display WFQ queuing configuration.
display qos queue wfq interface [ interface-type
interface-number ]