H3C Technologies H3C S6300 Series Switches - Manual (Page 32)

22
Displaying and maintaining QoS policies
Execute display commands in any view and reset commands in user view.
Task Command
Display traffic class configuration.
display traffic classifier user-defined [ classifier-name ] [ slot
slot-number ]
Display traffic behavior configuration.
display traffic behavior user-defined [ behavior-name ] [ slot
slot-number ]
Display QoS and ACL resource usage. display qos-acl resource [ slot slot-number ]
Display QoS policy configuration.
display qos policy user-defined [ policy-name [ classifier
classifier-name ] ] [ slot slot-number ]
Display QoS policy configuration on the
specified or all interfaces. display qos policy interface [ interface-type interface-number ]
[ inbound | outbound ]
Display information about QoS policies
applied to VLANs. display qos vlan-policy { name policy-name | vlan vlan-id } [ slot
slot-number ] [ inbound | outbound ]
Display information about QoS policies
applied globally. display qos policy global [ slot slot-number ] [ inbound |
outbound ]
Display information about QoS policies
applied to a control plane.
display qos policy control-plane slot slot-number
Display information about the pre-defined
QoS policy applied to the control plane. display qos policy control-plane pre-defined [ slot slot-number ]
Clear the statistics of the QoS policy
applied in a certain direction of a VLAN. reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
Clear the statistics for a QoS policy
applied globally.
reset qos policy global [ inbound | outbound ]
Clear the statistics for the QoS policy
applied to a control plane.
reset qos policy control-plane slot slot-number