H3C Technologies H3C SecPath F1000-E - Manual (Page 10)

2
F1000-S-EI chassis views
Figure 3 F1000-S-EI front view
(1) Copper Ethernet ports 0 to 5 (10/100/1000Base-T) (2) Console port (CONSOLE)
(3) USB port
(4) CF card slot (CF CARD)
Figure 4 F1000-S-EI rear view
(1) OPEN BOOK mark (2) Interface module slot 2 (SLOT2)
(3) Interface module slot 1 (SLOT1) (4) AC-input power receptacle
(5) Power switch (ON/OFF) (6) Grounding screw and sign
Interface modules
Interface modules must be purchased separately.
4GBE/8GBE
The 4GBE and 8GBE interface modules provide four and eight 10Base-T/100Base-TX/1000Base-T
autosensing Ethernet ports (RJ-45 connectors), respectively. These ports can be set to operate as Layer 3
interfaces or Layer 2 interfaces. Connected to the processor by a 10 Gbps bus, the interface modules
provide high-performance processing power.