H3C Technologies H3C SecPath F1000-E - Manual (Page 73)

65
Interface modules (optional)
4GBE/8GBE
Table 28 4GBE/8GBE specifications
Item Description
Connector type RJ-45
Number of interfaces
4GBE: 4
8GBE: 8
Compliant standard 802.3, 802.3u, and 802.3ab
Interface type MDI/MDIX autosensing
Frame format
Ethernet_II
Ethernet_SNAP
Cable type Category-5 twisted pair or higher
Transmission distance 100 m (328.08 ft)
Hot swapping Supported
Rate and negotiation mode
10 Mbps (autosensing) Half-/full-duplex
100 Mbps (autosensing) Half-/full-duplex
1000 Mbps (autosensing) Full-duplex
When the rate and negotiation mode of Ethernet copper ports are 10/100 Mbps and half-/full-duplex,
the Ethernet copper ports are operating in forced mode. When the rate of Ethernet copper ports is
1000 Mbps, or the rate and duplex mode are not specified at the same time, the Ethernet copper ports
are operating in autonegotiation mode.
The Ethernet copper port does not support MDI/MDIX autosensing when operating in forced mode.
The Ethernet copper port supports MDI/MDIX autosensing when operating in autonegotiation mode.
4GBP
Table 29 4GBP specifications
Item Description
Connector type LC
Transceiver module
type
SFP
Number of interfaces 4
Compliant standard 802.3, 802.3u, and 802.3ab
Frame format
Ethernet_II
Ethernet_SNAP
Interface rate 1000 Mbps (recommended) in full-duplex mode