H3C Technologies H3C SecPath F1000-E - Manual (Page 63)

55
Fan 1 State: Normal
Table 16 Command output
Field Description
Fan 1 Number of fan.
State
Fan status:
• Normal—The fan is operating properly.
• Absent—The fan is not present.
• Fault—The fan has failed.
Displaying power supply information
Use the display power command to display power supply information.
<Sysname> display power
Power Information:
Power 1 Status: Normal
Power 2 Status: Absent
Table 17 Command output
Field Description
Power 1 Power supply number.
Status
Power supply status:
• Normal—The power supply is operating properly.
• Absent—The power supply is not present.
• Fault—The power supply has failed.
Displaying temperature information
Use the display environment command to display temperature information, including the current
temperature and temperature alarm thresholds.
<Sysname> display environment
System Temperature information (degree centigrade):
----------------------------------------------------
SlotNo Temperature Lower limit Upper limit
0 40 0 50
Table 18 Command output
Field Description
SlotNo Number of the slot in which the interface module resides
Temperature Current temperature
Lower limit Lower limit of temperature
Upper limit Upper limit of temperature