H3C Technologies H3C SecPath F1000-E - Manual (Page 80)

72
LED Status Description
(green)
Off No CF card is present or the CF card is not recognizable.
On A CF card is in position and has passed the POST.
Flashing
The system is accessing the CF card. Do not remove the CF card
in this state.
(green)
Off The device has no power input or the card is faulty.
Slow flashing
(1 Hz)
The card is operating properly.
Fast flashing (8
Hz) The application software is being loaded, or the card is not
working.
(green)
Off No interface module is present or the interface module is faulty.
On The interface module is operating properly.
(green)
Off The AC power module has no power input.
On The AC power module is operating properly.
Interface module LEDs
4GBE/8GBE
The status LEDs of the 4GBE and 8GBE are similar. This chapter takes the 4GBE as an example.
Figure 57 4GBE/8GBE status LED
Table 37 LED description
LED Status Description
(yellow/green)
Off No link is present on the port.
Steady green A 1000 Mbps link is present on the port.
Flashing green Data is being transmitted or received at 1000 Mbps on the port.
Steady yellow A 10/100 Mbps link is present on the port.
Flashing yellow
Data is being transmitted or received at 10/100 Mbps on the
port.