H3C Technologies H3C SecPath F1000-E - Manual (Page 78)

70
Appendix B LEDs
Panel LEDs
F1000-E panel LEDs
Figure 54 F1000-E front panel LEDs
Table 34 LED description
LED Status Description
(green)
Off No CF card is present or the CF card is not recognizable.
On
A CF card is in position and has passed the power-on self-test
(POST).
Flashing
The system is accessing the CF card. Do not remove the CF
card in this state.
(green)
Off No interface module is present or the interface module is faulty.
On The interface module is operating properly.
(green)
Off The device has no power input or the card is faulty.
Slow flashing
(1 Hz)
The card is operating properly.
Fast flashing
(8 Hz) The application software is being loaded, or the card is not
working.
(yellow/green)
Off No RPS power is input.
Steady green The AC power input and RPS power input are both normal.
Steady yellow
The AC power input is faulty, and the RPS power input is
normal.
(green)
Off The AC power module has no power input.
On The AC power module is operating properly.