H3C Technologies H3C SecPath F1000-E - Manual (Page 61)

53
Displaying the electrical label data
Electrical label data is also called permanent configuration data or archive information, including name
of the interface module, interface module serial number, MAC address, and vendor name.
• Use the display device manuinfo command to display the electronic label data for the interface
modules.
<Sysname> display device manuinfo
slot 0
DEVICE_NAME:F1000-E
DEVICE_SERIAL_NUMBER:210235A26F0079000002
MAC_ADDRESS:000F-e245-678e
MANUFACTURING_DATE:2007-12-14
VENDOR_NAME:H3C
• Use the display device manuinfo slot slot-number command to display the electronic label data for
the interface module in a specified slot.
<Sysname> display device manuinfo slot 0
DEVICE_NAME:F1000-E
DEVICE_SERIAL_NUMBER:210235A26F0079000002
MAC_ADDRESS:000F-e245-678e
MANUFACTURING_DATE:2007-12-14
VENDOR_NAME:H3C
Table 12 Command output
Field Description
The operation is not supported on the
specified board or subslot The method that uses the display device manuinfo command to display
the electronic label data for interface modules is not supported.
Displaying CPU usage statistics
Use the display cpu-usage command to display CPU usage statistics.
<Sysname> display cpu-usage
Unit CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Command output
Field Description
Unit CPU usage CPU usage statistics.
1% in last 5 seconds
After a boot, the system calculates and records the average CPU usage rate
every five seconds.
This field displays the average CPU usage rate in the last five seconds.
1% in last 1 minute
After a boot, the system calculates and records the average CPU usage rate
every one minute.
This field displays the average CPU usage rate in the last minute.