H3C Technologies H3C SecPath U200-A U200-M U200-S - Manual (Page 25)

16
3. Use the screws supplied with the UTM device to attach the mounting brackets to the UTM device,
as shown in Figure 16 .
Figure 16 Attaching the mounting brackets
4. Supporting the bottom of the UTM device with one hand, hold the UTM device with the other
hand, and slide the UTM device into the rack.
Figure 17 Sliding the UTM device into the rack
5. Attach the UTM device horizontally by fastening the mounting brackets to the rack with M6
screws.