H3C Technologies H3C SecPath U200-A U200-M U200-S - Manual (Page 54)

45
RDS 0% 0/ 16472
SC 0% 0/ 5771
IKE 0% 0/ bd6b0
L2TP 0% 0/ 1d4e8
MACA 0% 0/ 1c929
PSEC 0% 0/ 5151
ULOG 0% 0/ 1c347
MFIB 0% 0/ 12d5
STND 0% 0/ 9868
ROUT 0% 0/ 19374c
IFNT 0% 0/ 3e65
IPFF 0% 0/ 2e02
co0 0% 0/ 4c7aa2
…
Displaying detailed information about interface modules
Use the display device verbose command to display detailed information about interface modules.
<Sysname> display device verbose
[H3C]display device verbose
Status :OK
Type :RPU
Hardware :B
Driver :1.0
CPLD :2.0
SubCard Num :3
CFCard Num :1
Usb Num :1
The Fixed SubCard0 on Board0
Status :Normal
Type :Fixed Subcard
Hardware :B
Driver :1.0
CPLD :2.0
The SubCard1 on Board0:
Status :Absent
The SubCard2 on Board0:
Status :Absent
Displaying the electrical label data
Electrical label data is also called permanent configuration data or archive information, including name
of the interface module, interface module serial number, MAC address, and vendor name.
• Use the display device manuinfo command to display the electronic label data for interface
modules.