Launching the basic configuration wizard, Configuring the system name and user password – H3C Technologies H3C SecPath U200-A U200-M U200-S User Manual
Page 42
Advertising
33
Performing basic configurations in the Web interface
This section describes the procedure for performing basic configuration in the Web interface.
Launching the basic configuration wizard
1.
In the Web interface, select Wizard from the navigation tree.
2.
Click the Basic Device Information link to enter the first basic configuration page.
Figure 35 Basic configuration wizard—1/6
Configuring the system name and user password
1.
Click Next on the first basic configuration page to enter the username and password
configuration page.
Advertising