H3C Technologies H3C SecPath U200-A U200-M U200-S - Manual (Page 65)

56
Item Description
Interface type
Autosensing (the Ethernet port does not support MDI/MDIX autosensing when
operating in forced mode)
Frame format
Ethernet_II
Ethernet_SNAP
Cable type Category-5 twisted pair or higher
Transmission distance 100 m (328.08 ft)
Rate and negotiation mode
10 Mbps (autosensing) Half-/full-duplex
100 Mbps (autosensing) Half-/full-duplex
1000 Mbps (autosensing) Full-duplex
NOTE:
When the rate and negotiation mode of Ethernet copper ports are 10/100 Mbps and half-/full-duplex,
the Ethernet copper ports are operating in forced mode.
Interface module (optional)
2GE
Table 25 2GE interface specifications
Item Description
Connector type RJ-45
Number of interfaces 2
Interface standard 802.3, 802.3u, and 802.3ab
Interface type
Autosensing (the Ethernet interface does not support MDI/MDIX autosensing
when operating in forced mode)
Frame format
Ethernet_II
Ethernet_SNAP
Cable type Category-5 twisted pair or higher
Transmission distance 100 m (328.08 ft)
Rate and negotiation mode
10 Mbps (autosensing) Half-/full-duplex
100 Mbps (autosensing) Half-/full-duplex
1000 Mbps (autosensing) Full-duplex
NOTE:
When the rate and negotiation mode of Ethernet copper ports are 10/100 Mbps and half-/full-duplex,
the Ethernet copper ports are operating in forced mode.