Grass Valley 2000NET v4.0.0 - Manual (Page 55)

2000NET Instruction Manual 55
Using the 2000NET GUI
7. Select the 2000NET (4.0.0) selection in the modular folder. In the example
in Figure 34 , the 2000NET selection is highlighted. All of the modules
of this type accessible on the network will appear in the window on the
right under the
Client Name heading as shown.
The current software loaded on each module will be listed as well as the
IP address and other information for the module client.
8. Check the corresponding Client Name boxes to upgrade the modules or
use the Select All button to update all modules of this type present on the
network.
9. Press the Load button to perform the update to all the selected modules.
Figure 34. NetConfig Load Software Window