Grass Valley 2000NET v4.0.0 User Manual
Page 67
Advertising
2000NET Instruction Manual
67
Service
Figure 42. Capture Text Pulldown
7.
In the
Capture Text
window, browse to a location to save the text file as
. Select the
Start
button. This will capture the text
until you indicate it to stop.
Figure 43. Capture Text
8.
On the HyperTerminal screen, Press the
Enter
key several times to verify
the connection, then enter the
LogPrint
command shown in
.
Figure 44. LogPrint Prompt
9.
Press the
Enter
key to run the log.
10.
Once the log has stopped, you may also stop the text capture by
selecting
Capture Text
in the Transfer pulldown again and select
Stop
The text file will now contain a record of the last 300 commands
received by the frame.
Advertising