Grass Valley Imagestore 750 v.2.0.1 - Manual (Page 186)

RCP Operations Imagestore 750 User Manual
Page 186 Miranda Technologies Inc.
Keycaps must be added for control of DSK3 and DSK4 via the keypad.
The “DSK3” and “DSK4” buttons (originally keys “1” and “2”) are used to
arm cuts or fades (transitions) for the appropriate keyer. The “cut” and “fade”
buttons on the keypad are not active, but instead light up to show the arm
state for the appropriate keyer.
The remote control panel may be connected to any of the four serial ports on
the rear panel (see page 277).
The serial protocol must be set as ‘RCP Classic’ (see page 176).
The RCP may be connected to the Imagestore 750 at any time.