Grass Valley XtenDD v.4.2.4 - Manual (Page 119)

2. Panel Operation
2 – 90 Operating Instructions – Rev. 1 / 7.2002
REGISTER is a memory location where a snapshot or a timeline can
be stored. Registers are identified with a number
between 0 ... 99.
REGISTER MODE is an input mode for the register number in the TiM/E
panel section, in which the number is entered in one digit
(0 ... 9) or in two digits (10 ... 99) followed by functional
selections such as Enter, Cut or Auto.
BANK MODE is an input mode for the register number in the TiM/E
panel section panel. The bank number 0 ... 9
corresponds to the tens digit of the register number. When
the units digit of the register number is entered, the
corresponding snapshot or timeline is triggered
immediately.