Grass Valley XtenDD v.4.2.4 - Manual (Page 445)

3. Menu Operation
3 – 298 Operating Instructions – Rev. 1 / 7.2002
The parameter listbox appears for the current selected object. If it is a keyframe,
the parameter listbox shows the entry Store Keyframe [Yes/No]. The default
value depends on whether View On or Off is selected.
Store Keyframe [Yes] means that the keyframe data of the object are also stored
when the listbox is closed with OK. I.e. there is a simple possibility to change the
keyframe data.
When the listbox is opened, the cursor can be set with the mouse or the digipot to
other objects in the timeline. The listbox then shows the state of the current se-
lected object.
Double-clicking an object with the mouse opens the listbox just the same as the
button Modify Current.
This button enables selection of a range in the timeline. If a range is selected, the
button Modify all changes its inscription into Modify Range. All modifications are
performed in the selected range only.
Insert an object in a timeline. For details see below.
Current: Insert a keyframe with the actual settings
Stored: Insert a stored Snapshot or Sequence.
Enter the desired number.
Wait: Insert a wait object GPI, User, TOD, Hold.
Trigger: Insert a trigger object GPO, DVE, Machine, Memo, MaKE, PBus.
Loop: Insert a loop object Begin, End
Note to insert a PBus Trigger/Register:
Under Insert > Trigger > PBus, a Trigger PBus command or a PBus Register com-
mand can be inserted into the timeline.
PBus Trigger
The listbox represents the machines and the meaning of the trigger for the ma-
chines. The first line in the listbox shows the numeric value of the trigger. All ma-
chines get the same trigger whose meaning, however, can be different for the indi-
vidual machines. If the trigger is changed for one machine, in general, the display
of the other machines is also changed as well as the numeric value of the trigger.
PBus Register
In the first line, that register can be selected which has to be recalled. It shows the
machines. For each machine, it can be individually selected whether the recall has
to be performed or not.
Modify Current
Mark
Insert