Rosemount 3300 series, Reference manual – Emerson Guided Wave Radar Level and Interface Transmitters 3300 User Manual

Page 3

Advertising
background image

Reference Manual

00809-0100-4811, Rev CA
February 2006

Rosemount 3300 Series

www.rosemount.com

Rosemount 3300 Series

Guided Wave Radar Level and
Interface Transmitters

.

.

.

Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.

HART is a registered trademark of the HART Communication Foundation.

Teflon, VITON, and Kalrez are registered trademarks of DuPont Performance Elastomers.

Asset Management Solutions is a trademark of Emerson Process Management.

Cover Photo: CoverPhoto_08/CoverPhoto_07

NOTICE

Read this manual before working with the product. For personal and system safety, and for
optimum product performance, make sure you thoroughly understand the contents before
installing, using, or maintaining this product.

Within the United States, Rosemount Inc. has two toll-free assistance numbers.

Customer Central: 1-800-999-9307(

7:00 a.m. to 7:00 p.m. CST)

Technical support, quoting, and order-related questions.

North American Response Center:

Equipment service needs.

1-800-654-7768 (

24 hours a day – Includes Canada)

For equipment service or support needs outside the United States, contact your local
Rosemount representative.

The products described in this document are NOT designed for nuclear-qualified
applications.

Using non-nuclear qualified products in applications that require nuclear-qualified hardware
or products may cause inaccurate readings.

For information on Rosemount nuclear-qualified products, contact your local Rosemount
Sales Representative.

This product is designed to meet FCC and R&TTE requirements for a non-intentional
radiator. It does not require any licensing whatsoever and has no tank restrictions
associated with telecommunications issues.

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.

Advertising