Yaskawa Sigma-5 User Manual: Setup for Linear Motors - Manual (Page 11)

xi
 Installation (cont’d)
CAUTION
• Do not place clocks, magnetic cards, floppy disks, or measuring instru-
ments close to the magnetic way.
Failure to observe this caution may result in malfunction or damage to these items
by the magnetic force.
• Securely mount the linear servomotor onto the machine.
If the linear servomotor is not mounted securely, it may loosen during operation.
• Do not carry the magnetic way by its magnet protection cover.
Failure to observe this caution may result in injury by the cover’s edge or the shape
of the cover may become distorted.
• When removing the dummy plate for reducing magnetic force used for the
SGLFW magnetic way, pay attention to the magnetic attraction of the mag-
netic way. Do not place the removed plate close to the magnetic way.
Failure to observe this caution may result in injury or damage to the magnetic
way’s magnets or the magnet protection cover.
• Install SERVOPACKs, linear servomotors, and regenerative resistors on
nonflammable objects.
Installation directly onto or near flammable objects may result in fire.
• Never use the product in an environment subject to water, corrosive gases,
inflammable gases, or combustibles.
Failure to observe this caution may result in electric shock or fire.
• Do not step on or place a heavy object on the product.
Failure to observe this caution may result in injury or malfunction.
• Do not cover the inlet or outlet ports and prevent any foreign objects from
entering the product.
Failure to observe this caution may cause internal elements to deteriorate resulting
in malfunction or fire.
• Be sure to install the product in the correct direction.
Failure to observe this caution may result in malfunction.
• Provide the specified clearances between the SERVOPACK and the con-
trol panel or with other devices.
Failure to observe this caution may result in fire or malfunction.
• Do not apply any strong impact.
Failure to observe this caution may result in malfunction.
Cover
Magnetic way