JBL Synthesis SDP-45 4K - Manual (Page 32)

JBL SYNTHESIS SDP-45
Setup
- 32 -
MENU NAVIGATION OVERVIEW
For all menu screens the UP / DOWN / LEFT / RIGHT menu arrows are used to navigate through all the menu screens. If a screen has more options than
can be shown there will be an arrow in the right side of the screen to indicate this.
To exit any screen use the LEFT menu arrow.
To enter any screen use the RIGHT menu arrow.
To change any parameters use the VOL UP or VOL DOWN buttons or the SURR LEFT or SURR RIGHT buttons or the VOLUME KNOB.
You must exit the menu before the “Menu Time Out” occurs or your changes will not be saved. Changes are automatically saved
when exiting the menu.

Selecting > from the status menu opens the MAIN MENU. The Main Menu has 2 options, SYSTEM SETUP and SOURCE SETUP.
SYSTEM SETUP

Selecting SYSTEM SETUP from the MAIN MENU opens the system setup options menu. The items in the System Setup menu include those options that
are global, or effect multiple inputs or sources at a time, as well as any miscellaneous settings. Items that are not in the SYSTEM SETUP MENU include
those options that are source specific, or have the option to be either Source specific or System global.
SPEAKER DISTANCES
 
The speaker distances can be set using either METERS (M) or FEET (ft). The units can be changed from the MISCELLANEOUS setup menu. If you are
using a JBL SYNTHESIS SDEC digital EQ/Speaker Processor then leave all the distanced at the default of 2.0m as the JBL SYNTHESIS A.R.C.O.S.
calibration system will automatically set all speaker delays in the SDEC
NOTE