Logitek Electronic Systems Artisan - Manual (Page 11)

Logitek
2
Unpacking
2 Unpacking
This section details what you should do when unpacking your newly arrived Artisan surface.
Parts List
The exact list of parts received will vary depending on your order, but should generally include:
¾ 1 x Artisan Power Supply fitted with two PSU modules
¾ 1 x fully assembled Artisan frame, containing modules as ordered
¾ 1 x wide or narrow meter bridge assembly (option) with 2 x mounting brackets
¾ 2 x “Telco” cables to link console to PSU
¾ 1 x Hex tool to allow removal of modules and faders
You will receive a parts list with the system that is specific to the modules on your order.
In addition, you will receive Logitek Audio Engine parts, as per your order.
¬ See the Audio Engine Installation & Operation Manual for information on Engine
components.
Unpacking
Carefully unpack the cartons whilst looking for any signs of shipping damage. You may wish to save
the shipping cartons until the operation of the system is verified.
Report any damage to the shipping carrier immediately. Verify that the contents of each box match
the packing list and report any discrepancies immediately to Logitek in writing.
Contacting Logitek
In the event of a shipping problem, you can contact Logitek Electronic Systems in several ways:
U.S. Mail Logitek Electronic Systems, Inc.
522 Edgemoor Drive
Houston, Texas 77081
Telephone 877-231-5870
713-664-4470 (outside U.S. and Canada)
Fax 713-664-4479
Email [email protected]
Website www.logitekaudio.com
Logitek Artisan Reference Manual 9