7 stand-alone copy function, 1 supported paper and copy mode, 2 setting for stand-alone copy – Epson Stylus TX100 User Manual

Page 21

Advertising
background image

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300

Revision A

PRODUCT DESCRIPTION

Stand-alone Copy Function

21

Confidential

1.7 Stand-alone Copy Function

1.7.1 Supported Paper and Copy Mode

1.7.2 Setting for Stand-alone Copy

You can make settings by a specific key operation to select color copy, B&W copy, or
photo copy. Refer to

Table 1-16

for key operation methods.

1.7.2.1 Relation Between Original and Copy

The scanning start position is located on the front right of the scan bed. The relations
between the original placed face down and its copy are as follows.

Figure 1-6. Relation Between Original and Copy (Borderless/With Borders)

Table 1-18. Supported Paper and Copy Mode

Paper Type

Size

Print

Quality

Resolu-

tion

Dot

Size

Bi-D

Micro

Weave

Border-

less

Plain paper

A4,

Letter

Draft

360x120

Eco

ON

OFF

NA

Standard

360x360

VSD1

ON

OFF

NA

Photo Paper

4” x 6”

Standard

1440x720 VSD3

ON

ON

OK

Table 1-19. Settings for Stand--alone Copy

Settings

Function

Copy type

Select from color copy, B&W copy or photo copy by a key operation.

Layout

• Color Copy, B&W Copy

Normal layout with 3mm margins

• Photo Copy

Borderless (The area size of projections: Fixed to Maximum.)

Print
setting

Paper type

Refer to

Table 1-18

.

Paper size
Quality

Fit to Page

When “Fit to Page” is selected by the key operation, a copy is made
adjusting the image size to the paper by enlarging/reducing the
original. The zoom ratio is determined as follows, and the same ratio is
applied to both horizontal and vertical sides.
• Detects the image size of the original using the preview function.
• Calculates an appropriate zoom ratio from the image size and the

printable area of the paper.

• If the ratio falls into less than 25%, 25% is applied. 400% is applied

if over 400% likewise.

• For color/B&W copying, the zoom ratio is determined so as to

make a copy of the whole image of the original on the paper.

• For photo copying, the zoom ratio is determined so as not to leave

any margins on the paper.

Original Document

A

Scan bed

---

B

Scan area

“ 1-9 Scanning Range ” (p.14)

C

Original (face down)

---

OTM

Top margin (out of scan range)

“ 1-9 Scanning Range ” (p.14)

OLM

Left margin (out of scan range)

“ 1-9 Scanning Range ” (p.14)

Copied Document

D

Copied paper

---

E

Print area

“ 1-7 Printing Area (Margins) ” (p.14)

F

Copy

---

LM, RM

Left margin, Right margin

“ 1-7 Printing Area (Margins) ” (p.14)

TM, BM

Top margin, Bottom margin*

a

a

a

a

Scan / Print direction

A

A

B

B

C

C

D

D

E

E

F

F

Readable Length

Paper Length

Paper

Width

Paper Length

Readable

Width

Readable Length

OTM

OTM

OLM

LM

LM

RM

RM

TM

BM

BM

TM

OLM

Home position

Home position

„ Standard copy

„ Borderless copy

Advertising
This manual is related to the following products: