Epson Stylus TX100 - Manual (Page 39)

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
TROUBLESHOOTING Error Indications and Fault Occurrence Causes 39
Confidential
• Operation
• –
The top edge of paper does not go
through between the EJ Roller Unit and
the EJ Frame Assy.
EJ Frame Assy*
2. Check if the Wheel Star Metal, Spring Star Wheel and
Wheel Star Exit come off.
2. Reassemble the Wheel Star Metal, Spring Star
Wheel and Wheel Star Exit correctly.
EJ Roller*
1. Check if the EJ Roller is correctly assembled. 1. Reassemble the EJ Roller correctly.
2. Check if the EJ Roller Gear is damaged. 2. Replace the EJ Roller Gear with a new one.
The top edge of paper is not loaded to the
PF Roller Unit.
Upper Paper Guide*
1. Check if the Upper Paper Guides correctly assembled. 1. Reassemble the Upper Paper Guide to the Main
Frame correctly.
Table 3-4. Check point for Paper jam error according to each phenomenon
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point Remedy
Wheel Star Metal
Spring Star Wheel
Wheel Star Exit
EJ Roller
Upper Paper Guide
Note * : In case that the paper jam error occurs in each operation, the jammed paper contacts the nozzle surface of the Printhead and the Printhead may be damaged.