Epson Stylus TX100 - Manual (Page 61)

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
DISASSEMBLY/ASSEMBLY Removing the Housing 61
Confidential
„ Cover Wire
1. Open the Scanner Unit.
2. Release both the hooks in the direction of arrow, and remove the Cover Wire.
Figure 4-9. Removing the Cover Wire
When installing the Scanner Stand, secure the shorter leg of the
Scanner Stand Spring to the groove on the Scanner Unit, and secure
the longer to the hook of the Scanner Stand as shown below.
Figure 4-10. Installing the Scanner Stand
Hook
Cover Wire
Scanner Unit
Scanner Stand
Scanner Stand Spring
Hook
Groove
„ Make sure not to catch the Scanner Motor Cable and the
Scanner FFC with the Cover Wire.
„ When installing the Cover Wire, insert the rib B so as to let the
rib A of the Cover Wire under the Panel FFC.
Figure 4-11. Installing the Cover Wire
Panel FFC
Scanner Motor Cable
Cover Wire Rib A
Rib B
Scanner FFC