Epson Stylus TX100 - Manual (Page 86)

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 86
Confidential
4.5.10 Upper Paper Guide
† Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire ( p 60 ), Scanner Unit ( p 62 ), Middle Housing( p 63 )
Panel Unit ( p 64 ), Hopper ( p 72 ), Main Board ( p 65 )
CR Motor/ Driven Pulley ( p 75 ), Ink System( p 77 ), PF Encoder/ PF Scale( p 73 )
Main Frame ( p 84 )
† Removal procedure
1. Release the six hooks, and remove the Upper Paper Guide from the Main
Frame.
Figure 4-76. Removing the Upper Paper Guide
C A U T I O N
„ Be careful not to touch the roller part of the Upper Paper Guide
with bare hands to avoid degrading the print quality.
„ Do not lay the Upper Paper Guide with the rollers facing
downward.
Main Frame
Upper Paper Guide
Hook
When replacing the PE Sensor Lever, put the long leg of the lever
through the hole of the Upper Paper Guide, and secure the thin part
of the lever to the bearing of the Upper Paper Guide.
Figure 4-77. Installing the PE Sensor Lever
A D J U S T M E N T
R E Q U I R E D
Whenever the Upper Paper Guide is removed/replaced, the
required adjustments must be carried out.
• Chapter 5 “ ADJUSTMENT” (p.100)
PE Sensor Lever
Upper Paper Guide
Hole
Bearing