Eaton Electrical 34003991EN/EB - Manual (Page 2)

Network Management Card – User Manual 34003991EN/EB Page 2/118
Contents
1 EATON NETWORK SOLUTION 5
1.1 G ENERAL P RESENTATION 5
1.1.1 Connecting the UPS to the Ethernet network 6
1.1.2 Protection of the computers/servers 6
1.1.3 Supervision of the UPSs over the network 7
1.1.4 Connection 7
1.2 P RESENTATION OF THE N ETWORK M ANAGEMENT C ARD (NMC) 8
1.2.1 Compatibility with UPSs 8
1.2.2 Direct sending of E-mail 9
1.2.3 Sending text messages (SMS) 9
1.2.4 Compatibility with the Network Management Systems (NMS) – Trap sending 9
1.2.5 Environment Sensor (option) 9
1.3 T ECHNICAL DATA 10
1.3.1 Hardware characteristics 10
1.3.2 EMC Compatibility 10
1.3.3 Configuration 10
1.3.4 Administration 11
1.3.5 Network 11
1.3.6 Environment sensor 11
1.3.7 MIB (Management Information Base) 12
1.3.8 Default parameters 13
2 INSTALLATION 14
2.1 U NPACKING AND CHECK ON CONTENTS 14
2.2 I NDICATIONS 14
2.3 I NSTALLATION IN THE UPS 15
2.4 S ENSOR INSTALLATION ( OPTION ) 16
3 CONFIGURATION 17
3.1 C ONFIGURE IP PARAMETERS 17
3.1.1 Your network is equipped with a DHCP server 18
3.1.2 Your network is not equipped with a DHCP server 19
3.2 T EST AFTER CONFIGURATION 19
4 SUPERVISION AND ADMINISTRATION BY BROWSER 20
4.1 O PTIMISING THE PERFORMANCE OF YOUR BROWSER 20
4.2 UPS 21
4.2.1 UPS properties page 21
4.2.2 On-line help 33
4.2.3 UPS control 34
4.2.4 UPS weekly schedule programming 37
4.2.5 Shutdown parameters 38
4.2.6 Measurements 40
4.2.7 Event log 41
4.2.8 System log 42
4.3 N OTIFICATION 43