Eaton Electrical 34003991EN/EB - Manual (Page 49)

Network Management Card – User Manual 34003991EN/EB Page 49/118
If the hostname is not used, the IP address supplied by the DHCP server must be fixed to maintain connection with the
clients installed on the stations to be protected.
Note 2:
During the first connection, if the DHCP query is not successful, the NMC starts with the following IP configuration:
IP address:166.99.16.16
Subnet mask: 255.255.255.0
Gateway Address: 0.0.0.0
◗ Firmware Upload: Authorise (chose "Enabled") remote updating of the card's embedded software.
The default value for this parameter is "Enabled".
◗ Primary DNS Server: contains the IP address of the main DNS server ensuring conversion of the domain name to IP
address.
◗ Secondary DNS Server: contains the IP address of the secondary DNS server ensuring conversion of the domain
name to IP address if the primary DNS server is not available.
◗ SMTP Server: contains the name or IP address of the local server with which the card connects to send e-mails.
It may be filled in either as host + domain name (DNS resolution), or directly with the IP address.
The default value is smtpserver. The card uses the standard port (25) for sending e-mails.
Important note:
The card must be rebooted after any changes to these parameters.. See "System" page
Security: The administrator has to click on Save and enter his/her login/password to save any modifications.