4 choice 4: return to default configuration – Eaton Electrical 34003991EN/EB User Manual
Page 76
Network Management Card
– User Manual
34003991EN/EB
Page
76/118
6.4 Choice 4: Return to Default Configuration
Enables restoration of the
default configuration
of all the card’s parameters
-----------------------------------------------------------------------------
EATON
NETWORK MANAGEMENT CARD
-----------------------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
-----------------------------------------------------------------------------
Wait during configuration returns to default ...
Wait for the confirmation message.
Configuration has been set to default one.
You must Reset the card.
The card must be
restarted
in order for the new parameters to be taken into account.