Eaton Electrical 34003991EN/EB - Manual (Page 45)

Network Management Card – User Manual 34003991EN/EB Page 45/118
4.3.2 E-mail Message Settings
This page enables customisation of the content of the messages received by recipients of e-mails sent by the card.
Customisation is common to the four recipients that can be notified (see E-mail notification ).
◗ Sender
(59 characters maximum) identifies the source of the message. The default value is [email protected].
This field is free. However, depending on the type of SMTP server configuration, it is possible that the server
checks that the domain name contained in the Sender address exists, and even that the user in the Sender address
belongs to this domain.
◗ Subject
enables the user to specify the subject of the e-mail to be sent. By entering some free text and selecting from
several optional fields, if desired, the message subject is built:
- UPS name recalls the name of the UPS; it may or may not be selected.
- UPS location recalls the geographic location of the UPS (see System Settings); it may or may not be selected.
- Event message identifies the event generating the e-mail; it may or may not be selected.
◗ Message text is a free zone long of 255 characters maximum.