Eaton Electrical 34003991EN/EB - Manual (Page 97)

Network Management Card – User Manual 34003991EN/EB Page 97/118
7.4.4 Data for Pulsar MX frame 15 / 20
7.4.4.1 Status table
Status description Status to 0 Status to 1 Word (hex) Bit
Load protected no yes 40 0
UPS coupled no yes 40 1
Unit general alarm no yes 40 2
UPS in backup no yes 40 4
Battery low warning no yes 40 5
Low battery no yes 40 6
Operation on static switch no yes 40 7
Communication fault absent present 40 9
UPS overload no yes 40 A
Emergency stop absent present 40 B
Battery to be checked no yes 40 D
Device ventilation fault no yes 40 E
Manual bypass switch (Q3BP) open closed 41 6
Battery present absent present 42 0
Mains 1 voltage out of tolerance no yes 44 8
Mains 1 fuse fault no yes 44 9
Mains 1 frequency out of tolerance no yes 44 B
Redundancy lost no yes 45 7
Maintenance position no yes 46 1
Mains 2 overload no yes 46 5
Mains 2 thermal overload no yes 46 6
Output on bypass no yes 46 7
Mains 2 frequency out of tolerance no yes 46 9
Mains 2 voltage out of tolerance no yes 46 A
Phase M2 out of tolerance no yes 46 B
Mains 2 internal fault absent present 47 2
Charger general fault no yes 49 0
Battery charge no yes 49 1 & 3
Inverter major fault no yes 4C 1
Inverter overload no yes 4C 2
Inverter thermal overload no yes 4C 3
Inverter limitation no yes 4C 4
UPS fuse fault absent present 4C 5