Statistics, Configuration, Statistics -17 – Extron Electronics MLC 104 Plus Series User Manual
Page 57: Configuration -17, Preliminar y
3-17
MLC 104 Plus Series • Software-based Configuration and Control
PRELIMINAR
Y
Statistics
The Statistics page is mainly for administrators and maintenance personnel. It
shows information about system usage: the number of hours the system has been
turned on, how many hours the projector lamp has been used, how much time per
day and per week the system is turned on, and how many times each button on the
MLC has been pressed, either physically or virtually (via configuration software,
SIS commands, or event scripts). All of the button press and system use statistics
(with the exception of lamp hours) can be reset to 0 by clicking the Reset Statistics
button at the bottom of this screen.
N
This page is not available unless the MLC has been configured with Global
Configurator ver. 2.x or higher.
Configuration
There are four Configuration Web pages, which only administrators can access:
System Settings, Passwords, Email Alerts, and Firmware Upgrade.