Extron Electronics MLC 104 Plus Series - Manual (Page 117)

5-13 MLC 104 Plus Series • Special Applications
PRELIMINAR
Y
b. Type in the e-mail name (this will appear in the list of available e-mails in
GC), the subject
(which appears
as the set
e-mail’s subject
line), and the
body (the
e-mail’s
contents).
c. Click Add.
d. Click Done.
You may be
prompted to
save the e-mail
you just created.
If so, click Yes
to save the
e-mail. The
Email Manager
window closes.
14. Click to select one e-mail
(the one you just created)
in the Email Messages
list, as shown at right.
15. Click to select one or
more e-mail recipients
in the Contacts list. If
you need to add a new
contact, click Contact
Manager
and follow the
onscreen directions.
16. Click Apply Email/
Contacts
. The e-mail
and the recipient name(s)
appear in the Monitored
Conditions area, as
shown in the following
screen excerpt.
17. Click the Done button at the bottom of the Monitored Conditions Window,
which then closes.
18. Complete the rest of the configuration as desired, then save the project and
build and upload the configuration to the MLC.