Extron Electronics MLC 104 Plus Series - Manual (Page 74)

SIS ™ Programming and Control, cont’d
MLC 104 Plus Series • SIS Programming and Control 4-10
PRELIMINAR
Y
Command/r
esponse table for SIS commands (continued
)
Command
ASCII (T
elnet
)
(host to MLC
)
URL Encoded (W
eb
)
(host to MLC
)
Response (MLC to host
)
Additional description
V
iew the lockout mode status
X
X
X20(]
Show lockout (executive mode) status. X20(
= 0 (of
f, unlocked) or 3 (fr
ont panels,
contr
ol modules, and r
emote contr
ol
locked/disabled).
Example:
X
X
0
]
Executive mode is of
f.
Status commands
V
iew lamp hours status
6S
6S
X20%]
or
X20%
*
X20%]
X20%
r
epr
esents the number of elapsed
hours of pr
ojector lamp use. The MLC
responds with two sets of lamp hours only if two lamp hours have been set. If a lamp’s status has not been set, it is shown as the default (99999 hours) or “N/A”.
Set lamp hours status for 1 lamp
24
X20%
*6S
X20%
%2A
6S
Lhr*
X20%
]
X20%
repr
esents the five-digit numeric v
alue for elapsed lamp use hours, and it is used by script to determine the number sent in r
esponse to the “view lamp hours”
command (6S).
Set lamp hours status for 2
lamps
24
X20%
*
X20%
*6S
X20%
%2A
X20%
%2A
6S
Lhr*
X20%
*
X20%]
V
iew connection status
7S
7S
X21^]
This command lets you know whether the MLC’s scripts have determined if the display is still connected to the MLC. X21^
= 0 (disconnected), 1 (connected), or 2
(unknown).
Set display connection status
24
X21^
*7S
X21^
%2A
7S
Pcs
X21^]
This command is used to r
eset the
pr
ojector/display connection status flag
(
X21^
) used by scripts.
0 = pr
ojector not connected.
1 = pr
ojector is connected.
2 = undetermined status.