Extron Electronics MLC 104 Plus Series User Manual
Mlc 104 plus series, Outside front cover, Reference manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Outside front cover
- Inside front cover: safety instructions
- FCC Class A Notice
- Table of Contents
- Ch. 1: Introduction
- Ch. 2: Operation, Features, and Cabling
- Ch. 3: Software-based Configuration and Control
- Configuration and Control: an Overview
- The Basic Setup Steps: a Guide to this Chapter and Other Resources
- Communicating with the MLC
- Configuring IP-enabled MLCs for Network Communication
- Configuring the MLC 104 IP Plus for network communication via Global Configurator software
- Configuring the MLC 104 IP Plus for network communication using the ARP command
- Configuring the MLC 104 IP Plus for network communication via a Web browser
- Configuring the MLC 104 IP Plus for network communication using SIS™ commands
- Setting up the PC for IP communication with an IP-enabled MLC
- Global Configurator Software for Windows®
- Advanced Configuration
- Controlling an IP Link-enabled MLC
- Customizing the MLC’s Control Web Pages
- Ch. 4: SIS™ Programming and Control
- Ch. 5: Special Applications
- Using Monitoring to Make Functions Track Actual Conditions
- Working With Combination Source Devices
- Scheduling Front Panel Lockout Periods
- Sending E-mail by Pressing a Button (IP Models)
- Working With a Non-MediaLink Extron Switcher
- Using Digital Inputs
- Using Digital Outputs
- Using an Amplifier and Volume Controller with the MLC
- Controlling a Second Projector/Display
- Customizing HTML Files to Control Devices, Modify Embedded Web Pages, and Send E-mail Alerts (IP models only)
- Ch. 6: Labeling, Installation, and Mounting
- UL/Safety Requirements
- Installing or Replacing Button Labels
- Wiring Peripherals to the MLC
- Mounting the MLC
- Appendix A: Reference Material
- Appendix B: Firmware Updates
- Appendix C: Index
- Inside rear cover: warranty
- Outside rear cover: contact information