Extron Electronics MLC 104 Plus Series - Manual (Page 63)

3-23 MLC 104 Plus Series • Software-based Configuration and Control
PRELIMINAR
Y
Example of a page for a projector driver
GlobalViewer ® Web Pages
The MLC 104 IP Plus controller can be used as part of a network of devices based
on Extron IP Link technology, such as IP Link interfaces. Global Configurator
(GC) is a Windows-based program used for configuring and customizing the
Web browser-based GlobalViewer (GV) application for each IP Link interface,
System 5 IP, MLC 226 IP, MLC 104 IP Plus, or other IP Link-based device on a
network. Once an MLC 104 IP Plus is configured, its GlobalViewer Web pages
allow the user to manage, monitor, and control the MLC and the devices connected
to it.
Refer to the Global Configurator help file and the MLC 104 IP Plus Series Setup Guide
for specific information on how to use the software and perform basic setup tasks for a
MLC 104 IP Plus.
N To work with Global Viewer Web pages, you must use Microsoft Internet
Explorer version 6.0 or higher with ActiveX enabled.
N If the MLC has been configured with passwords, the GlobalViewer Web pages are
password protected. Although default embedded Web pages are accessible via the
GlobalViewer Web pages, nonadministrators (people with only user access) are
able to access the Control and Status default Web pages only.
Four screens for the MLC are available via Global Viewer: Control, Monitor,
Schedule, and Info ( ). Read the
Global Configurator Help file for details on each screen and how to use the
GlobalViewer pages.