Website and e-mail, Our firmware, Our publication disclaimer – Pressure Systems 9022 User Manual
Page 6
Pressure Systems, Inc.
NetScanner™ System (9016, 9021, & 9022) User’s Manual
www.PressureSystems.com
- v -
ATTN: PSI REPAIR DEPARTMENT (7-digit RMA number)
Pressure Systems, Inc.
34 Research Drive
Hampton, Virginia 23666
PSI will return warranty items prepaid via UPS GROUND. If the customer desires
another method of return shipment, PSI will prepay and add the shipping charges to the
repair bill.
Incoming freight charges are the customer’s responsibility. The customer is also
responsible for paying shipping charges to and from PSI for any equipment not under
warranty.
All products covered under the PSI warranty policy will be repaired at no charge. An
analysis fee will be charged to quote the cost of repairing any item not under warranty. If,
for any reason, the customer decides not to have the item repaired, the analysis fee will
still be charged. If the quote is approved by the customer, the analysis fee will be waived.
The quote for repair will be based on the PSI flat rate for repair, calibration, and board
replacement. When these prices do not apply, the quote will be based on an hourly labor
rate plus parts. All replaced parts are warranted for 90 days from the date of shipment.
The 90-day warranty is strictly limited to parts replaced during the repair.
Website and E-Mail
Visit our website a
to look at our new product releases,
application notes, product certifications, and specifications. E-mail your questions and
comments to us:
.
Our Firmware
This manual was prepared for various versions of module firmware as were released at the
time of this manual publication. Addenda will be distributed as deemed necessary by PSI.
Any questions regarding firmware upgrades may be addressed to the Applications Support
Group. Firmware revisions, manual addenda, and utility software may also be obtained
from the PSI web page at
.
Our Publication Disclaimer
This document is thoroughly edited and is believed to be thoroughly reliable. Pressure
Systems, Inc., assumes no liability for inaccuracies. All computer programs supplied with
your products are written and tested on available systems at the factory. PSI assumes no
responsibility for other computers, languages, or operating systems. PSI reserves the right
to change the specifications without notice.