Epson AcuLaser C9300 - Manual (Page 13)

❏ EpsonNet Config with Web Browser is a Web-based configuration utility that allows you to
configure the network interface for TCP/IP, MS Network, AppleTalk, IPP, and SNMP. See
“EpsonNet Config with Web Browser” on page 51.
❏ EpsonNet Print is a utility program that provides peer to peer printing to Epson printers on the
TCP/IP network. See “EpsonNet Print” on page 58.
Terms and Concepts
Configuration -- a prepared set of conditions for proper operation of a device. Configuring the
network interface is to prepare it to work with protocols available on a network.
DHCP -- a dynamic host configuration protocol. It is a protocol that assigns dynamic IP addresses to
devices on a network.
EtherTalk -- the communication protocol of AppleTalk governing Ethernet transmissions
ftp -- a TCP/IP application protocol for file transfer
lpd -- a TCP/IP remote printing protocol application
Print queue -- a location where a print job is stored as a file, until the network interface sends the job to
the assigned printer
Protocol -- a rule that controls how data or information is exchanged through a network. Computers
and software cannot communicate with each other using different protocols.
TCP/IP -- Transmission Control Protocol/Internet Protocol, a layer of protocols that provides
communication between nodes on a network
SSL -- Secure Sockets Layer, a security protocol for transmitting data between a web server and a
browser
Epson Network Guide
Introduction 13