Epson AcuLaser C9300 - Manual (Page 32)

LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on
page 58 for details.
1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers
and Faxes .
2. Under Printer Tasks, click Add a printer to start the Add Printer wizard, and then click Next.
3. Click Local printer attached to this computer, clear the Automatically detect and install
my Plug and Play printer check box, and then click Next.
Note:
You must clear the Automatically detect and install my Plug and Play printer check box because
the printer is attached directly to the network, not to a Windows XP computer.
Epson Network Guide
How To 32