Epson AcuLaser C9300 - Manual (Page 52)

By typing the IP address of the network interface for the URL in your browser, you can start EpsonNet
Config to allow you to configure the network interface for TCP/IP, NetWare, MS Network,
AppleTalk, IPP, and SNMP.
Supported Web browser
❏ Microsoft Internet Explorer version 6.0 or later
❏ Apple Safari version 5.0 or later
❏ Mozilla Firefox version 3.6 or later
❏ Opera version 10.63 or later
❏ Google Chrome version 8.0 or later
About Web browser setting
When running EpsonNet Config with Web Browser, be sure not to use a proxy server to access the
Internet. If the Access the Internet using a proxy server check box is selected, you cannot use
EpsonNet Config with Web Browser. Use the following steps to clear the Access the Internet using a
proxy server check box.
1. Right-click the Internet Explorer icon on the desktop, and then select Properties.
2. Click the Connection tab.
3. Clear the Access the Internet using a proxy server check box.
Configuring the Network Interface Using Web-Based EpsonNet Config
After you have assigned an IP address to the network interface using EpsonNet EasyInstall, EpsonNet
Config for Windows or Macintosh, or the arp/ping command, you can configure the network
interface using Web-based EpsonNet Config.
Note:
❏ A Web browser must be installed on your computer.
❏ TCP/IP must be correctly set for the computer and the network interface.
❏ Do not run both EpsonNet Config for Windows or Macintosh and Web-based EpsonNet Config at
the same time.
Epson Network Guide
Network Software 52