Epson AcuLaser C9300 - Manual (Page 8)

Chapter 1
Introduction
About Your Printer
Your printer has a built-in Ethernet interface and can connect anywhere on your network using
10Base-T, 100Base-TX, and 1000Base-T Ethernet. The built-in Ethernet interface, which is called the
network interface in this manual, automatically selects the correct standard when it connects to a
network. In addition, it supports and automatically selects the IEEE 802.2, IEEE 802.3, Ethernet II, and
Ethernet SNAP network protocols.
Because the network interface supports multiple protocols and automatically detects protocols on
your network, you can print from Microsoft
® Windows ® and Apple ® Macintosh ® applications.
Use the Software Disc to easily configure the network interface for use on the TCP/IP network and
install the printer driver. You can use the printer on the TCP/IP network at once.
If you want to configure the network interface for protocols such as TCP/IP, AppleTalk ® , IPP, and
SNMP, use EpsonNet Config, the configuration utility provided with your product, to quickly and
easily configure the network interface to use those protocols.
Note:
The EpsonNet Config utility configures the network interface to work only with protocols that exist on
your network. This does not imply that you can use all of the above-mentioned protocols on your network
or operating system. The protocols that the network interface can use may vary depending on the
operating system and the network configuration.
About This Guide
This Network Guide contains information about using the network interface on a network. It includes
how to set up the network interface, install the configuration software, and modify network settings of
your printer and computers.
For information about your printer, see your User’s Guide.
Note:
❏ To read the online guide, you must have Adobe Reader or Adobe Acrobat Reader installed on your
computer.
Epson Network Guide
Introduction 8