Epson AcuLaser C9300 - Manual (Page 59)

Installing EpsonNet Print
Follow the steps below to install EpsonNet Print. Be sure to install it on a computer connected to the
network.
1. Make sure all the applications are closed, then insert the Software Disc into the CD-ROM drive.
2. The Epson Install Navi screen opens automatically.
If the Epson Install Navi screen does not appear, double-click EPSETUP.EXE on the CD-ROM.
3. Click the Software List icon.
4. Select EpsonNet Print and then click the Next button.
5. Follow the on-screen instructions to complete the installation.
Your computer is now set up to print using LPR via EpsonNet Print. See the next section to set up your
printer.
For Windows 7/Vista/XP/Server 2008/Server 2003/2000/NT 4.0 Users
Follow the steps below to add a port using the Add Printer Wizard.
❏ If you want to add a port for a printer with its IP address assigned automatically by the DHCP
server or router, see “Adding a port for a printer assigned with a dynamic IP address” on
page 59.
❏ If you want to add a port for a printer with its IP address assigned manually, see “Adding a port for
a printer assigned with a static IP address” on page 63.
Note:
❏ Be sure that the computer is connected to the network and TCP/IP is correctly set.
❏ A valid IP address must be assigned to the printer.
Adding a port for a printer assigned with a dynamic IP address
1. For Windows 7/Vista/Server 2008: Click Start, Control Panel, and then View devices and
printers (Windows 7), or Printers (Windows Vista/Server 2008). Click Add a printer to start the
Add Printer Wizard.
Epson Network Guide
Network Software 59