Epson AcuLaser C9300 - Manual (Page 49)

Hard disk drive space 50 MB
Installing EpsonNet Config
Follow the steps below to install EpsonNet Config on your computer to configure the network
interface.
Note:
❏ Log on to the operating system with an administrator account to install EpsonNet Config.
❏ If you add or delete protocols or services from your operating system after installing EpsonNet Config,
EpsonNet Config may not work correctly. If this happens, uninstall EpsonNet Config and then install
it again.
1. Make sure all the applications are closed, then insert the Software Disc in the CD-ROM drive.
2. The Software Installation screen opens automatically.
If the Software Installation screen does not appear, double-click EPSETUP.EXE on the CD-ROM.
3. Click User Installation if it appears.
4. Click the Install Network Utility button.
5. Click the icon located next to EpsonNet Config Ver.3.
6. Follow the on-screen instructions to complete the installation.
Note:
If the Windows Security Alert window appears after you start EpsonNet Config, click the Allow
access
or Unblock button; otherwise the devices are not listed on the screen of EpsonNet Config.
Accessing the EpsonNet Config User’s Guide
The EpsonNet Config User’s Guide contains detailed information on EpsonNet Config. Follow the
steps below to access the EpsonNet Config User’s Guide.
1. Click Start, point to Programs (for Windows 2000 users) or All Programs (for Windows 7,
Vista, XP, Server 2008, and Server 2003 users), select EpsonNet, and then select EpsonNet
Config V3
.
Epson Network Guide
Network Software 49