Precision Digital PD865 - Manual (Page 29)

PD865 Snooper Modbus Serial Input Meter Instruction Manual
29
Main Menu
The main menu consists of the most commonly used functions: Mode,
Serial, Program, and Password.
 Press
Menu button to enter Meter Programming then press Up
arrow button to scroll through the main menu.
9865 nmode serial prog pass
Run Program
 Press
Menu at any time, to exit and return to Meter Run. Changes
made to settings prior to pressing Enter/Ack are not saved.

Changes to the settings are saved to memory only after pressing
Enter/Ack.

The display automatically moves to the next menu every time a
setting is accepted by pressing Enter/Ack.
Setting Numeric Values
The numeric values are set using the Right and Up arrow buttons.
Press Right arrow to select next digit and Up arrow to increment digit
value.
The digit being changed is displayed brighter than the rest.
Press the Enter/Ack button, at any time, to accept a setting or Menu
button to exit without saving changes. Pressing Menu to exit while
entering Scaling data does not save any of the Scaling data.
0 4.00 0 4. 00 0 5. 00
Select
Next Digit
Increment
Digit Value
Accept
Setting
Next Menu
Item
If a digit cannot be changed because it will cause an out of range value,
the next digit will be selected automatically.
Go to the Program-Decimal Point menu to select the decimal point.