RIGOL DSG3000 Series - Manual (Page 133)

Chapter 6 Specifications RIGOL
DSG3000 User’s Guide 6-5
Level Sweep
Operating modes Step sweep (equally spaced level steps)
List sweep (the list of arbitrary level steps)
Sweep modes Single, continuous
Sweep range Full level range
Sweep shape Triangle, ramp
Step change Linear
Number of points
Step sweep 2 to 65535
List sweep 1 to 6001
Dwell time range 20ms to 100s
Triggering Auto, trigger key, external, bus (GPIB, USB, LAN)
Internal Modulation Generator (LF)
Internal Modulation Generator (LF)
Waveforms Sine, square, triangle, ramp, sine sweep
Frequency range
Sine, sine sweep 0.1Hz to 1MHz
Square 0.1Hz to 20kHz
Triangle, ramp 0.1Hz to 100kHz
Resolution 0.01Hz
Frequency error Same as RF reference source
Output voltage [1]
Setting range 1mV to 3V
Resolution 1mV
Output impedance 50Ω (nom.)
Sine sweep
Sweep modes Single, continuous
Sweep range Frequency range of LF
output
Sweep time 1ms to 1000s
Sweep shapes Triangle, ramp
Triggering Auto, trigger key, external,
bus (GPIB, USB, LAN)
NOTE: [1] Measurement in high-impedance state.