RIGOL DSG3000 Series - Manual (Page 28)

RIGOL Chapter 1 Quick Start
1-12 DSG3000 User’s Guide
Rear Panel Overview
The rear panel of DSG3000 series RF signal generator is as shown in the figure below.
Click the number in the figure to view the corresponding introduction.
1 2 3 4 5 6
7 8 9 10 11 12 13
Figure 1-5 Rear Panel
1. USB Device
The instrument complies with USBTMC class
protocol.
This interface is used to connect to a PC for remote
instrument control.
2. USB Host
This input is used to connect the USB storage device
to update the system, store system states and
sweep lists. You can also connect the USB power
sensor or power meter with USB interface to achieve
power measurement control and amplitude
calibration of a measurement system.
3. LAN
The instrument complies with LXI core device 2011
class standard, and supports WebServer, Socket and
other remote control modes.
This interface is used to connect the PC or network
for remote instrument control.