Rose Electronics MultiVideo - Manual (Page 19)

MODELS
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
5
UltraView Pro models
“M”
chassis
“B”
chassis
“C”
chassis
Figure 6. UltraView models
Label Description
Power Power LED (Green when unit is on)
On/Off “M” chassis only. In = ON
Out = OFF
LEDs Indicator LEDs; Numbered pairs of LEDs
shows status and power of connected
computers.
+ And –
switches*
+ Connects to the next sequential CPU, -
Connects to the previous sequential CPU.
Table 3. Front panel
* The + and – switches are also used when upgrading the firmware, to reset
the unit to factory default, and diagnostics.