Rose Electronics MultiVideo - Manual (Page 26)

12
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
8. Next, select “Expansion width” from the configure system menu and
press enter. Enter the number of computer ports on a slave unit and
press enter. This setting determines how many computers are on an
expansion unit and determines which computer number is associated
with which physical connector. If all expansion units have an equal
number of ports, enter the number of ports on one expansion unit for
the width number. If there are mixed expansion units with a different
number of ports, the width value should be the number of computer
ports that is on the expansion unit that has the most computer ports.
Care should be taken when mixing slave units. For example, if your
system consists of an 8-port master, two 8-port slaves and a one 4-
port slave, and you program the expansion width to 8, there will be 4
blind ports on the 4-port unit. If you program the expansion width to 4,
then only computers 1-4 on the 8-port slave units can be accessed.
9. Finally, select “Expansion units” and press enter. Enter the total
number of slave units in the system and press enter. This command
configures how may slave units are connected to the master unit.
10. Press Esc key to return to the main menu and select “Exit” and press
enter. You will be prompted to save the changes made. Select “Yes”
and press enter to save.
Refer to the configuration menu section for a detailed explanation of each of
the configuration menus. The following menus are available.
The “Configure system” menu is for configuring the KVM stations keyboard
and mouse, the expansion units, scan settings, and other keyboard
settings.
The “Configure computer” menu section allows you to assign a unique
name to each of the computers. This makes it easy to identify which
computer your switching to. You can also change the CPU keyboard and
mouse types from this menu.
The “Configure overlay” menu section allows you to change the general
appearance of the on-screen display and other features.
The “Configure security” menu is used to enable a configuration and access
passwords. A unique password can be assigned for access to the
configuration menus and to restrict computer access.