Rose Electronics MultiVideo - Manual (Page 21)

CABLES
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
7
UltraView Pro Cables
(See Appendix C for cable part numbers)
UltraView Pro to KVM station cable
The KVM cable connects a keyboard, video monitor, and mouse to the
UltraView Pro. The KVM cable is configured with a DB25M connector on
one end and a connector for the keyboard, video, and mouse cables on the
other end. These KVM cable connectors should be compatible with the
types of connectors that are on your KVM stations keyboard, monitor, and
mouse cables.
UltraView Pro to CPU cables
A CPU cable is used to connect each computer to the UltraView Pro. The
CPU cable connects from the DB25F CPU ports on the UltraView Pro to the
keyboard, video, and mouse ports on each CPU. This cable is configured
with a DB25M connector on one end and a connector for the keyboard,
video, and mouse on the other end. These CPU cable connectors should
be compatible with each CPUs keyboard, video, and mouse port.
UltraView Pro master to slave cables
In systems needing access to additional CPUs, the UltraView Pro can be
cascaded to other UltraView Pros. To cascade an UltraView Pro to other
“Slave” units, you will need one DB25M to DB25M, switch-to-switch cable
for each slave unit.
(Rose Electronics switch-to-switch cable part number
CAB-CXVSMMnnn.)