Rosen Aviation 1702 Series : 17.5 inch WideScreen High definition - Manual (Page 27)

Rosen Aviation 17.5” HD Widescreen Display
Document Number: 102990 Revision: C
Date: 03/17/14
Template: 4.2.3-6-FM; Revision A; 16 May, 2005 Page 27 of 34
8.7.2. Constant Switch Mode
Constant enables you to specify the two sources the display will switch between when
the Source Select switch pin #2 (SELECT_SW_IN) goes between an open state and a
ground state.
Highlight TechnicianSource ModeSource Select and press ENTER.
Select Constant and press ENTER. Press ▼ to select Open and press ENTER.
Select which video input will be set in an open state and press ENTER.
Press ▼ to select Ground and press ENTER.
Select which video input will be to a ground state and press ENTER.
Select Back to return to the Technician Menu.
Press EXIT to exit the OSD.
Figure 31 Source Select Constant options
9. TECHNICAL REFERENCES AND SUPPORT
Always check www.rosenaviation.com under the Products tab to
ensure that you are working with the most current revision of
technical documentation.
Table 3 Technical references
Product Part Number Location
Universal Color Remote Control Contact Rosen Sales for part number availability
RS-232 7-button External Controller 0300-408 www.rosenaviation.com
If you need assistance in configuring a universal remote control to work with a 17.5
” High-definition
display, please contact Rosen Aviation Technical Support at 541.342.3802.